HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  RegisterRegister  MemberlistMemberlist  UsergroupsUsergroups  Log in  
Share | 
 

 not made for pipes and tobacco - hacks reappropriation

Go down 
AuthorMessage
Zeno Marx

avatar

Registration date : 2010-06-26

PostSubject: not made for pipes and tobacco - hacks reappropriation   Wed Apr 11, 2018 3:10 pm

List your hacks, please. I thought a thread dedicated to hacks would be handier than running into them in the middle of conversations in other threads.

What are good commonly found, household chemicals to use for de-oxidizing stems without harming the hallmarks etc? Oxyclean? I believe there is a fountain pen repair service that also has their own proprietary solution.

I think it was here that someone pointed out using fishing rod rubber clips for an option for hanging and organizing pipes on the wall rather than going with the traditional pipe rack. Heck, even mount one on the dash of your car. Available on Amazon, ebay, etc.
EXAMPLE

Another user, and a youtuber or two, mentioned vinyl tubing as an alternative to pipe bits. I've found 3/8" and 1/2" cover a large range of pipe stem sizes (inner diameter tubing specs). Less expensive and more durable, though it requires a little more effort to modify for use. Can be found in black, clear, and possibly other colors. Watch for thickness of tubing as well, because it can be thinner or thicker variety. I've found the best luck is buying by the foot at your local hardware store rather than buying a giant coil of it at Home Depot for $8+. I paid $.59 for a foot of clear 1/2", and that should make for around 12 stems (an inch is just about perfect for a bit). I personally prefer the tooth feel over rubber as well. A little resistance, so you aren't totally giving up on the feel of the actual stem.


And then today, on Briar Blues youtube channel, he used a sunglass case for pipes for traveling and storage. They come in different styles and configurations. Some of them actually look like pipe display cases, while some have drawers like a little jewelry organizer.

Back to top Go down
View user profile
ontariopiper

avatar

Age : 46
Location : Kitchener, Ontario CANADA
Registration date : 2015-03-10

PostSubject: Re: not made for pipes and tobacco - hacks reappropriation   Thu Apr 12, 2018 9:12 am

Great idea for a thread!

Oxyclean (and its many off-brand equivalents) is great for raising oxidation on stems. I use about a tablespoon of powder in a small plastic tray and add warm water from the tap to cover the stems (about 1 to 1.5 cups of water?). Soak for a few hours, though I often forget them and leave it overnight without any harm.

An Oxy soak CAN dissolve the paint in stamped logos, so if you don't want to have to refill them, a dab of petroleum jelly on the logo will stop the Oxy from getting to the goods.

After the soak, I scrub away the loose oxidation with 0000 steel wool and/or Magic Eraser type pads.
Back to top Go down
View user profile http://www.dadspipes.com
 
not made for pipes and tobacco - hacks reappropriation
Back to top 
Page 1 of 1
 Similar topics
-
» CL/C made mkIV helmet dated 1945
» Canadian made black tanker beret
» Mistakes Were Made
» [Made by me.:X]
» Canadian made M1 helmets?

Permissions in this forum:You cannot reply to topics in this forum
Brothers of Briar :: Pipes & Tobacco :: Tobacciana & Accessories-
Jump to: